This guide outlines the steps for viewing and modifying parameter settings on the TMAX Touch system.

Viewing Parameters

Use these steps to audit current settings without making changes.

1. Access Configuration: Tap Configure.
   • If you do not see a shield icon with a “3” in the center on the main screen, type 3333 and press Enter.
2. Open View Mode: Tap Configure again and enter 800, then press Enter.
3. Select Parameter: Type the ID of the specific parameter you wish to view and press Enter.
4. Navigate Beds: Use the Up and Down arrows to navigate to different beds and see the parameter values.
5. Check Another Parameter: Press Enter and follow step 3.
6. Exit: Hit the X above the enter button to exit the keypad.

Changing Parameters

Follow these steps to update or modify specific values for your beds.

1. Access Configuration: Tap Configure and enter 3333.
2. Open Edit Mode: Tap Configure again and enter 801.
3. Select Parameter: Enter the parameter you want to change on the next screen.
4. Select Bed: Navigate with up-down arrows to the bed needed, hit enter.
5. Update Value: Enter new value (Screen resets to step 3 after hitting enter to change more values).
6. Exit: Hit the X above the enter button to exit the keypad.