Category: Wi-Fi Tags

Verify Wi-Fi Tag Internal Connections

To verify the connections inside of a Hydro bed, please follow the steps below: 1. Remove the Top Access Panel There should be two (2) Phillips screws on the top access panel which need to be removed. The image below circles the location of the two screws you will need to remove. 2. Locate the […]
Read More

Verifying WiFi Tag Network Broadcast

This guide will walk you through the process of verifying the functionality of a WiFi tag. You will need access to a device (preferably a cell phone) during this procedure. 1. Reboot the WiFi tag To reboot the WiFi tag, simply unplug the tag’s power adapter from the wall, wait ~5 seconds, and plug the […]
Read More

How to Reboot a WiFi Tag

This guide will walk you through rebooting a Wi-Fi tag on a HydroMassage bed. 1. Locate the Power Adapter CT-1100 (Released Prior to June 2025) The USB power adapter looks similar to a cell phone charger. This is what provides power to the tag. The power adapter is circled in red below: CT-1300 (June 2025 […]
Read More